• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat leave and come back as they please without you having to let them in or out. They can also help prevent your cat from toileting in the house.

Fitting a cat flap in the door panel made of upvc is a lot easier than a glass door, but it will require some expertise and the appropriate tools.

Measure the Door

Fitting a cat door in a front door can be difficult however, provided that the Cat flap in upvc door panel flap is the appropriate one and you follow the directions you can make it less difficult. We will be showing you how to mark out the shape, use a jigsaw to cut out the door's opening and then complete the job by attaching the flap to the door. This will ensure that the flap stays in place and shields the door from wind and rain causing damage.

To determine the size of the cat flap that you need, measure your pet's width. This will let you select a cat flap that is big enough to allow your pet to go into the house and leave without having to open the door every time.

Once you have the measurements you can determine the area on the door where the template should be placed, usually, this is done using an X, however some kits come with a drawing that shows the location to drill, if yours does then stick it to the door and use a pencil to draw around it. If your door has sill or moulding on the bottom of it ensure that you have enough clearance from these as this will ensure your cat's safety and will prevent them from getting access to your home.

Then put on your eye protection and a dust mask. Then using a jigsaw start cutting along the line you have pencilled in, don't try to push the blade too hard because this will cause it to cut faster than you would like it to. Use a set square to ensure that you're cutting the material properly and that the hole is a rectangle shape. Once you are satisfied with the final result, you can take out the rest of the door material.

Draw a Line

The cat flap allows you to let your pet go inside and out without worrying about unwanted visitors or unwelcome gifts. It also prevents drafts and helps to keep the temperature of your home steady. However, fitting cat flap in upvc door panel an animal flap on your door can seem like an intimidating task for those who have never done it before, which is why many to hire a professional joiner or carpenter to do the job. This is a viable option, however you can do it yourself if your tools are right and the steps are adhered to.

Although this is much simpler when using a timber door it is still possible to do this in uPVC doors, but you need to be very cautious not to damage the doors, as this can end your warranty. The first step is to measure the door and ensure that it is able to fit the new cat flap. If you have an ordinary uPVC panel it should be a breeze. However in the case of composite or another type of door, you may require more care.

The next step is to measure the height of your cat's stomach. This is the amount of height between the floor and the bottom of your cat's stomach. You'll need to locate a space at the entrance that allows your cat to move through easily. Once you've got the information you'll have to mark the area with a spirit-level and a pencil so you are sure that the hole will be suitable for your cat.

After you've marked the area, it's time to cut the hole. You will need an jigsaw. It is important that you be patient to ensure that the cuts are smooth and clean instead of uneven and rough, as it could cause damage to your door. Wear safety glasses and a dust mask while working with a jigsaw. Inhaling sawdust is dangerous for your health. After you've completed the cutting process, you will have to smooth out the edges of the hole with sandpaper so that your cat flap will fit easily into place.

Cut a Hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit is quite difficult. It is tempting to do it yourself, but unless you have plenty of experience with DIY, it's probably best to get an expert to complete the task for you. A botched job may not only be unsightly but it could also be a security risk and also allow cold air to get in when the cat is outside, and hot air to escape once inside.

The first thing to do is mark out the location of the hole in the door using a pencil and a spirit level. This will ensure that it is correctly placed and runs in a straight line with the other components of the door. Make sure you have sandpaper to smooth any rough edges.

Once the line has been drawn, you can cut the hole using the jigsaw. Remember to wear the appropriate safety equipment for working with a power tool. If you're worried about noise, you can purchase a cordless jigsaw which is more quiet and easy to use.

It is essential to only cut away the material required to make the cat flap. A little bit of extra material will be needed to cover the thickness of the wall of the flap, but cutting off more than this can cause problems and even damage the doors frame.

A door made of upvc may have a metal frame or a panel inside which could block the microchip cat flap and if this is the case you will need to cut an oversize hole to ensure the metal does not come into contact with the wall of the cat flap, if this is done it is essential to fill in the oversize gap and render it watertight.

If you are fitting an animal flap to a upvc door or double glazed window with a metal frame, you will need to speak to a specialist who can provide you with a new pane of glass with the hole for the cat flap already drilled inside. It is cheaper to do this instead of trying to install a cat flap into an existing pane of glass that hasn't been designed specifically for this purpose.

Fit the Flap

Cat flaps allow your pet the freedom to go and come whenever they like, allowing them to relax in the home whenever they want to. If you've got an uPVC door it can be difficult to install an animal flap, especially if you don't own glass panes that can be cut for one. If you're willing to buy and install a replacement half-glazed uPVC panel, it's possible to install a cat flap to the doors. It's not just a matter of drilling a hole into the door. You'll also need to take a few steps to ensure that it is secure.

A composite, upvc door panel with cat flap, or GRP door panel is usually made up of a plastic skin which is bonded to an insulating polystyrene core. The material is quite fragile and care must be taken when cutting into it to avoid causing damage. This kind of door typically comes with a template drawing which you can use as a guide for cutting the hole in your door.

After you've marked the position of the hole in your door, it's now time to install the flap itself. You can purchase and install various models including basic button operated ones to microchip activated units that only let in your pet. But, regardless of the type of cat flap you select, it's crucial to ensure that your cat can comfortably use the flap without becoming trapped outside in bad weather.

It's a good idea to opt for circular fittings rather than a square one, as circles are more securely cut into the door glass. It's because square holes are more likely to crack the glass when they're drilled. This is also a safer choice, as you won't have to drill into the toughened glass which could break and cause harm to your pet or family. This is especially crucial if you have elderly or children living in your home who could be injured by glass shattering.